This is explanation of overhead models of SeaWalk Light-Jigging series.

 

You will never lose response speed of jerk taking advantage of high sensitivity

and manipulate ability thanks to characteristics of overhead model.

Tip section which is loaded flexibility will let jig swim naturally,

belly to butt section which is employed moderate stiffness

enable you to strike aggressively.

We have tested proto type continuously to develop those factors in various situation

with various kind of Tungsten jig.

 

 

Please refer to jig weight and depth of water as value you can fish comfortably.

Please check commentary about each models.

 

Light-Jigging B66Ｌ

Jig：40~80g  Line PE 0.6~1.0

 

This is versatile model for light jigging on 20-40m depth of water with Tungsten jig.

 

It will good to be used for Tairubber game especially horizontally on deep area

thanks to its flexible tip section and belly section which have moderate stiffness

with high sensitivity to let you notice vital information or slightly changes of current.

If you wish to aim Hair tail or Sea bass on bay area and try not to let jig move too much,

this 66L will make it easier than other models for sure.

 

 

Light-Jigging B66ML

Jig：60~120g Line PE 0.6~1.2

 

66ML have characteristic to cover wide range of depth of the sea (30m～80m)

thanks to its well-balanced sensitiveness and powerfulness.

 

Even you fish with Tungsten-jig, you will never lose response speed of jerk

taking advantage of high sensitivity

and manipulate ability thanks to characteristics of overhead model.

 

 

It is also good to be used for Tairubber game in deep area(80m～100m depth)

or current running rapidly.

 

 

 

Light-Jigging B65M

Jig：60~150g Line PE 0.8~1.5

 

This 65M is the most powerful model of light-jigging series

which is good to be fished in high population of blue runner.

Compared to other models of light-jigging series, it have been loaded little stiffer blank than other

and you can enjoy manipulating jig manually with this 65M at your will.

 

 

 

You can handle 80g～150g of Tungsten-jig comfortably with it.

If you are going to fish in 100m depth of water or rapid area with fine line,

we recommend you to take this 65M.

 

Comparison images of each model

This is images that stand for bending curve as you are jerking jig.

This shows you flexibility of tip section of 66L and 66ML compared to 65M

which have loaded more stiffness.

You can of course notice differences of those characteristics once you use them actually.

 

 

This is images that have set 500g tension of drag while holding rod at 30 degrees of angle.

You can see that there are differences of bending curve on tip and belly section

between 66L and 66ML.

You can also see differences of stiffness and power clearly between 66M and other 2 models.

 

 

This is images that have set 800g tension of drag while holding rod at 30 degrees of angle.

Although there are not many chance to keep rod on angle like this while fish is on,

you can see that power of butt section is still remained.

Please refer  to this images of bending curve as a potential of power on butt section.

 

 

 

 

You can aim so many kind of fish such as Grunt, Horse mackerel, Hair tail, Flat fish,

blue runner, Seabass or Rockfish if you take advantage of “Light-Jigging”

We believe that the method of “Light-Jigging” will expand the possibility of jigging.

We hope that anglers who are planning to choose one of them for catching fish

will be satisfied with performance and potential as a “Light-Jigging rod”.